歡迎進入深圳市漢斯福特科技有限公司網站！
13352927502
歡迎進入深圳市漢斯福特科技有限公司網站！
13352927502
Product Center
產品簡介
The Checkline MTM torque testers is designed to provide an precise and economical way to measure and calibrate a wide range of torque tools. Historically, transducers had to be purchased individually and connected to a display via a switch box or a group of cables. With the Check-Line MTM, up to 4 transducers can be integrated in one compact housing. An external transducer can be connected to further increase the measuring range (requires optional external input).
The small footprint also allows for a clean, well-organized work space. This helps eliminate the endless searching for cables, adapters, and other accessories that may be needed.
Features such as independent CW and CCW calibration, multi-point linearization, metrology grade transducer shafts, and overload protection to 200% of full scale are standard. All of the above translate to a better product for you at an unbeatable price.
Available with 2, 3 or 4 torque transducers
Selectable units of: Ft-lb, IN-lb, IN-oz, KGF-m, KGF-cm, GF-cm, CN-m, N-m
Small footprint of the MTM allows for a clean, well-organized work space
200% Overload protection
LED Indicator Shows Active Transducer
Connect External transducers with optional input jack
Includes NIST Traceable calibration certificate with data for each transducer
Replaceable shaft design. If one shaft is damaged, replace that shaft, not the entire unit.
Hi-Lo Limits for Go-NoGo testing of tools
Accuracy of ±0.5% of Indicated Value (within calibrated range)
Calibrated Range | 10-99% Full Scale, bi-directional (Standard) |
Extended Range | 5-99% Full Scale, bi-directional (ER Option) |
Accuracy | ±0.5% of indicated value (within calibrated range) |
Resolution | 4 Active Digits |
Overload Protection | 200% Full Scale bi-directional |
Operating Modes | Track, Peak, 1st Peak |
Filtering | Selectable; 125Hz, 250Hz, 500Hz, 1000Hz, 1500Hz and 2000Hz |
Memory | data storage of up to 999 readings |
Data Output | RS-232 |
Display | 62 x 62mm backlit LCD |
Alarm Limits | Panel Mounted LED for Visual Alarm Limits |
Power | NiMH rechargeable batteries provide 8-10 hours continuous use |
Weight | 6-12 lbs, depends on number of transducers and configuration |
Operating Temp | 32 - 120 °F (0-50 °C) |
Warranty | 1 Year |
Calibration Certificate | Includes NIST Traceable calibration certificate with data for each transducer |
Standard Accesories | Joint Simulator for 1/4" & 3/8" drives, AC adapter/Charger |
Optional Accessories | Joint Simulators for 1/2", 3/4" & 1" Transducers, Extended Ranger "ER" Option |
配件
ER Extended Range, increases certified range to 5-99% (instead of 10-99%) PER TRANSDUCER
UPG-25 Upgrade Accuracy from ±0.5% to ±0.25% - PER TRANSDUCER
MTM-EXT Input for External Transducers, IT Sensors
TT-SOFT Data Transfer Software for TT Series, Includes USB Output Cable
ICBL-5000-L Mil Spec Lemo to Lemo Connecting Cable, Torque Display to Torque Tester
MTM-HB Horizontal Mounting Bracket for MTM
訂貨型號
MTMDP-2S Torque Tester with any 2 Transducers up to ITI-500
MTMDP-2L Torque Tester with any 2 Transducers up to ITF-750
MTMDP-3S Torque Tester with any 3 Transducers up to ITI-500
MTMDP-3L Torque Tester with any 3 Transducers up to ITF-750
MTMDP-4S Torque Tester with any 4 Transducers up to ITI-500
MTMDP-4L Torque Tester with any 4 Transducers up to ITF-750
相關型號
TT-3000
產品分類
相關文章
當前位置：
上一個：
返回列表
