3192A加速度傳感器

產品簡介

IEPE是指一種自帶電量放大器或電壓放大器的加速度傳感器

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：175

產品咨詢 13352927502

詳細介紹在線留言

IEPE是指一種自帶電量放大器或電壓放大器的加速度傳感器。IEPE是壓電集成電路的縮寫。因為由加速度傳感器產生的電量是很小的，因此傳感器產生的電信號很容易受到噪聲干擾，需要用靈敏的電子器件對其進行放大和信號調理。IEPE中集成了靈敏的電子器件使其盡量靠近傳感器以保證更好的抗噪聲性并更容易封裝。

美國Dytran的3192A是一款I(lǐng)EPE加速度傳感器/振動傳感器，靈敏度1V/g，頻響低至0.5Hz。

The Dytran 3192A is a rugged IEPE piezoelectric accelerometer with a sensitivity of 1 V/g, a built-in Faraday shield for electrostatic noise immunity, excellent low frequency response of 0.5 Hz and the capability to resolve vibrations as low as 0.00007 g's RMS.

Design of the model 3192A incorporates an annular shear ceramic sensing element, packaged in a stainless steel housing with a 2-pin MIL-C-5015 axial connector and 1/4-28 mounting hole. The sensor is hermetically sealed for reliable operation in high humidity and dirty environments and case isolated to avoid EMI/ground loop interference.

特性

1. 1,000 mV/g sensitivity

2. 5g range

3. 0.5 to 1,000 Hz frequency range (±5%)

4. 2-pin axial connector

5. 1/4-28 tapped hole

6. 190 grams

7. Stainless steel

8. Hermetic

9. Case isolated

10. Internal Faraday shield

11. Low frequency response

12. IEPE

應用

1. Bridge monitoring

橋梁監測

2. Low frequency vibration measurements

低頻振動測量

3. Modal analysis of large structures

模態分析

4. Seismic monitoring

地震監測

Weight 6.65 oz 190.0 grams

Size Hex x Height 1.125 x 2.25 Inches 28.57 x 57.15 mm IC charge amplifier

Connector Type 10SL-4P 10SL-4P

Mounting Provision : Tapped Hole 1/4-28 x .250 deep 1/4-28 x .250 deep

Material : Base, Cap and Connector 304L 304L

Element Style Material Ceramic Ceramic

Type Planar Shear Planar Shear

Sensitivity, ±5% [1] 1 V/g 0.10 V/m/s2

Range F.S for ± 5 Volts Output ±5 g's ±49 m/s2

Frequency Range, ±5% 0.5 to 1000 Hz 0.5 to 1000 Hz

Resonant Frequency, Nominal 12 kHz 12 kHz

Equivalent Electrical Noise Floor 0.000036 grms 0.00035 m/s2 rms

Spectral Noise 1Hz 4.0 μgrms/√(Hz) 39.24 μm/s2 rms/√(Hz)

10Hz 8.1 μgrms/√(Hz) 79.46 μm/s2 rms/√(Hz)

100Hz 0.5 μgrms/√(Hz) 4.91 μm/s2 rms/√(Hz)

1000Hz 0.36 μgrms/√(Hz) 3.53 μm/s2 rms/√(Hz)

Linearity [3] ± 2% % F.S. ± 2% % F.S.

Maximum Transverse sensitivity 5 % 5 %

Strain Sensitivity 0.005 g/με 0.05 m/s2/με

ENVIRONMENTAL

Maximum Vibration ±50 gpeak ±490 m/s2 peak

Maximum Shock ±100 gpeak ±981 m/s2 peak

Temperature Range -60 to+250 °F -51 to121 °C

Seal, Hermetic Glass-to-metal/Welded Glass-to-metal/Welded

ELECTRICAL

Supply Current Range [4] 2 to 20 mA 2 to 20 mA

Compliance Voltage Range + 18 to +30 Volts +18 to +30 Volts

Output Impedence,Typ 100 Ω 100 Ω

Bias Voltage +11 to +13 VDC +11 to +13 VDC

Discharge Time Constant 0.8 to 2.0 Sec 0.8 to 2.0 Sec

Output Signal Polarity for Acceleration Towards Top Positive Positive

Electrical Isolation, Case Ground To Mounting Surface 10 GΩ, min 10 GΩ, min

訂貨型號

3192A

配件

1. Model 6176 mounting stud (1/4-28 to 1/4-28)

2. Model 4110C current source power unit, model 6186 adhesive mounting base, model 6187 magnetic mounting base, model 6190 magnetic mounting base, model 6194 protective boot

3. 電纜線：6038A, 6080A, 6082A, 6406A, 6407A, 6459A

相關型號

3191A

3192A 01.png