歡迎進入深圳市漢斯福特科技有限公司網站！
13352927502
歡迎進入深圳市漢斯福特科技有限公司網站！
13352927502
Product Center
產品簡介
The DT-315A heavy duty, battery powered stroboscope possesses the same great features of the DT-311A with the added convenience of total portability via its own internal power supply. The quick recharge battery lasts up to four hours of full continuous usage with its high intensity flash rate. The DT-315A provides power flexibility by utilizing either its rechargeable internal, batteries or AC line-power when plugged into the included AC adapter/charger unit. These features make the shimpo DT-315A ideal for quality inspection and preventitive maintenance of automated motion equipment.
Internal, fast-charge rechargeable battery supply
Aluminum construction provides exceptional durability
High polish and focused reflector eliminates “blind" viewing areas
External trigger allows unit to be automatically synchronized with equipment
Continuous duty cycle eliminates need to shut down for cooling
Phase shift allows visual analysis of rotating/reciprocating objects
High accuracy ( ±0.01% of reading ) is ideal for QC inspection and process control
Synchronous output enables strobe to drive other strobes
Flash timer control conserves flash tube life
Easy tri-pod or permanent mounting with integral mounting thread
Model | DT-315A |
Flashing Range | 40.0 – 35,000 fpm (flashes per minute) |
Accuracy | ±0.01 % of reading |
Resolution | 0.1 fpm: 40.0 – 5,000 fpm |
0.2 fpm: 5,001 – 8,000 fpm | |
0.5 fpm: 8,001 – 10,000 fpm | |
1 fpm: 10,001 – 35,000 fpm | |
Phase Shift | Use +/- push buttons (360° in 6 seconds) |
Display Update Time | 0.2 sec approx |
Output Signal | Synchronous, 400 μsec. Pulse output, 0 to +12 VDC amplitude(approx.), 4.7 KΩ impedance |
Rate Multiplier/Divide | 0.0 to 35,000 fpm |
Flashing Range | Synchronous Mode: 60.0 ~ 3,000FPM / Delay mode:200 ~ 3,000 FPM |
External Mode Accuracy | ±0.01 % ±1 digit |
Phase Shift | 0 to 359° with 1° resolution |
Delay Time | 0 to 2,000 mSec from 40 – 10,000 fpm |
External Trigger Input Signal | LO level: 0 -0.8 VDC, HI level: 2.5 – 12 VDC or open collector (NPN),pulse width 50 μsec min. |
Input Impedance | 4.7 KΩ to 12 V / 6.8 KΩ to 0 V |
Display | 5 digits, 0.4" (10 mm) high, LED |
Flashtube Power/Life | Xenon, 10 W max. (100 million flashes) |
Flash Duration | 10 to 40 μs automatically adjusts with flash rate |
Lux Rating | 8" (20 cm) Distance = 4500 lx @ 1500 fpm, 3375 lx @ 6000 fpm with 4.5" (110 mm) irradiation diameter. |
Sensor Power Supply | 12 VDC (40 mA) |
Low Battery Indicator | Display shows all L’s |
Battery Life | 1 – 2 hours depending on flash rate |
Power Requirement | Rechargeable Battery or AC Line Power with included AC adapter |
Operating Temperature | 32° – 104°F (0 – 40°C) |
Dimensions | 9.84" L x 4.72" W x 4.72" H (250 mm x 120 mm x 120 mm) |
Product Weight | 4.4 lbs (2 kg) |
Package Weight | 5.5 lbs (2.49 kg) |
Warrany | 2-Year |
Included Accessories | AC charger/adapter, flash tube removal tool, handle |
訂貨型號
DT-315A | Heavy duty, rechargeable battery powered stroboscope |
DT-315A-230V | Same as DT-315A except with 230V power |
NIST-STROBE | NIST traceable certificate for digital stroboscopes, includes data |
配件
BAT-DT315A/P-ASSY | Internal, rechargeable battery assembly for DT-315A |
DT-315CHARGER | AC adapter/charger for DT-315A |
CARRYING-CASE | Carrying Case for DT-315A |
FLASHTUBE-311-2 | Replacement flash tube for DT-315A |
CABLE-311-10FT | Input/output cable for DT-315A |
SAS-DT300 | Permanent mount swing arm |
SG-300 | Rubber strobe guard for DT-315A |
LS-S50MLR-DT311 | Laser sensor with NPN/PNP (NO,NC) outputs, 1.5 kHz frequency, LED indication, DT-315A Connector Cable, NEMA 6 (IP67) rating |
相關型號
DT-311A
DT-361
DT-365
DT-365E
DT-315AEB
DT-311J
DT-315P
DT-326B
產品分類
相關文章
當前位置：
上一個：
返回列表
